MasterSeal 536 is a prepacked system, consisting
of acrylic polymer as Part A and a premixed
cementitious powder as Part B. The two parts on
mixing yield a brushable, smooth slurry with
excellent bond to most substrates.
RECOMMENDED USES
MasterSeal 536 is designed to be used as an
effective waterproofing membrane on a variety of
substrates. Applications include:
waterproof coatings to the internal faces of
sumps, planter boxes etc., before tiling or
other surface finishing.
treating terraces, balconies, kitchen and toilet
floors as a sandwich treatment, to prevent
water ingress.
treating bridge and flyover decks before
wearing course to protect concrete from
rainwater ingress.
FEATURES AND BENEFITS
Cost effective/general purpose - Need only
minimum surface preparation; economical to
apply
Permeable to water vapours - Allows surface
to breath, preventing buildup of vapour
pressure
Flexible - Can stand moderate movements of
hairline cracks
Brushable consistency - Easy to apply by
brush or spray
PERFORMANCE DATA
Pull off bond strength >1.0 N/mm²
Water Penetration Test (0.5kg/cm²) <1.0 mm
ESTIMATING DATA
The minimum recommended coverage of
MasterSeal 536 is 1.0 to 1.5 kg/m² to get 0.5 mm
to 0.8 mm thick wet film build per coat. Actual
coverage depends upon the method of application,
the texture and porosity of the surface.
Therefore material requirement is approximately 2
kg/m² for 1 mm thick coating.
Note: mix only complete packs.