low Viscosity Epoxy Resin Injection
DESCRIPTION
A solvent free, two-component super low viscosity liquid based on high strength epoxy resins. Especially for injection into cavities and cracks in concrete.
USES
To fill and seal cavities and crack in structural concrete such as columns, beams, foundations, decks and water-retaining structures.
ADVANTAGES
Super low viscosity
Suitable for both dry and damp conditions
High mechanical and adhesive strength
Low creep characteristic under sustained loading
Non-shrink and hence ensures complete surface contact and bond
Hard but non brittle, high compressive, tensile and flexural strength
INSTRUCTION FOR USE
Surface Preparation
Surface must be clean and sound. It may be dry or damp, but free of standing water.
Mixing
Pre-mix each component. Pour all the contents of the hardener pack into the base container, and mix using a slow speed (400-600 rpm) power mixer until homogeneous.
Application
To Gravity feed crack – Pour Deltagrout EP Injection into the open crack until completely filled.
To Pressure inject cracks – Use automatic injection equipment or manual method.
LIMITATIONS
Maximum crack width 5 mm
Minimum crack width 0,20 mm
Minimum age of concrete must be 28 days prior to application.
CAUTION
Wear protective clothing, goggles, gloves and or barrier cream. In case of contact with skin, wash plenty of water immediately and consult a physician.
STORAGE
When stored in dry conditions at 5 - 35 ºC, the shelf life is 12 months.