sql

Delta floor HD 5000 Hardener

Rp. 100
Last Updated
14 Oct 2023
Country Origin
Indonesia
Minimum Order
1 set

Heavy Duty Epoxy Resin Floor Mortar Screed

DESCRIPTION

A three-component 5 mm thick floor mortar screed based on solvent-free epoxy resins, bound together with non metallic natural aggregate with selected shape, grading, high physical quality and mechanical performance.

USES

Deltafloor HD5000 has been developed and designed for floor areas where high resistance to mechanical and chemical attack is required. It forms a non-slip, abrasion-resistant epoxy resin flooring of 5 mm thickness, which is ideal for medium to heavy duty industrial floors, workshop and factory floors, airport hangars, stairs, warehouses, traffic lanes, engineering workshops, and car parks.

ADVANTAGES

  • Easy to apply
  • Excellent adhesion to substrate
  • Provide long term protection in heavy industrial environments
  • Excellent resistance to abrasion
  • High mechanical strengths
  • Solvent free and good resistance to a wide range of industrial chemicals.

CONSUMPTION

Priming with Deltaprime Series at 0.2 – 0.3 kg/m2in one coat of application. Consumption of Deltaprime series may vary due to the substrate condition

Mortar screed with Deltafloor HD5000 at 11 - 12 kg set (A+B+C)/m2for 5 mm thickness.

If top coat is needed, apply Deltafloor TC301 at 0.5 kg/m2for 300 micron thickness in two coats.

INSTRUCTION FOR USE

Substrate must be structurally sound, clean, dry and free from all traces of loose material, laitance, oil and grease. Any unsound material must be removed before application. Priming with Deltaprime Series and apply Deltafloor HD5000 when primer is still wet and tacky. For mixing Deltafloor HD5000, first stir all component A (enamel) with an electric stirrer prior to batching, then add all component B (hardener) into the mixer and mix them for 3 minutes at a low speed. Place some portion of component C (fillers) into the mixer and whilst mixing in progress, add the remaining portion of component C (fillers). Continue mixing process until a homogeneous and uniformly moist mix is obtained.

CURING TIME

Foot traffic 12 hours

For light vehicle traffic 2 days

Fully cured after 5 days

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1