Depo Kimia Konstruksi

sql
NitoFloor FC 130
Hover to Zoom

Last Updated
16 Apr 2020
Country Origin
Indonesia
Minimum Order
1 Pail

Specification of

Water based, epoxy resin floor and wall

coating

Uses

To provide a dust-proof easily cleaned surface this is

resistant to most oils and liquids. It is suitable for use on walls

and floors in warehouses, garages, light industrial and food

processing areas, kitchens and other areas of pedestrian and

light vehicular traffic.

Advantages

 Durable - good resistance to abrasion.

 Economical - easy to apply, minimizes cleaning costs.

 Water based - safe in use, low odour.

 Attractive - available in a range of colours.

 Good resistance to a wide range of chemicals.

 Antimicrobial - resistant to fungal and bacterial growth.

Standards compliance

Nitoflor FC130 complies with BS 476, Part 7: 1987-Class 1

spread of flame.

Description

Nitoflor FC130 is a two-component water dispersed epoxy

resin coating system supplied in pre-weighed packs ready for

on-site mixing and use. The cured film forms a hard, flexible,

semi-matt seal to concrete and other substrates.

The product is available in a wide range of standard colours

and is also available in a clear grade.

Technical support

Fosroc offers a comprehensive range of high performance,

high quality flooring, jointing and repair products for both new

and existing floor surfaces. In addition, the company offers a

technical support package to specifiers, end-users and

contractors, as well as on-site technical assistance in

locations all over the world.

Design criteria

Nitoflor FC130 is designed for application in two coats to

achieve an approximate total dry film thickness (DFT) of 100

microns.

Substrates should be dry and not suffer, or be likely to suffer,

from rising damp. If necessary, suitable damp-proof

membranes should be installed to prevent this. Substrates

should not have a relative humidity greater than 80% at the

time of installation.

Properties

The values given below are average figures achieved in

laboratory tests. Actual values obtained on site may show

minor variations from those quoted.

Physical properties

@ 20oC @ 35oC

Pot life*: 2 hours 1 hour

Time between coats: 6-24 hrs 4-16 hrs

Initial hardness: 24 hours 16 hours

Full cure: 7 days 7 days

Dry Film Thickness

(DFT) (2 coats): 100 microns (approximately)

*Note: that after the pot life has expired the material,

although not hardened, may not have increased in viscosity

but the characteristics of the product change. Excess

material should be discarded after this point.

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1

Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot