Specification of MasterFlow 700 Cementitous Grouting MBS
MATERIAL DESCRIPTION
MasterFlow 700 is a ready-to-use pumpable, natural
aggregate, general purpose grout which undergoes
controlled expansion in the plastic state. MasterFlow 700
is a Class A grout as defined by AS 1478.1-2000,
Appendix E, section E5.1. MasterFlow 700 may be placed
in dry (damp) packed, plastic or fluid consistency and is
generally used in applications requiring a grout thickness
between 10mm and 100mm.
AREAS OF APPLICATION
All general purpose grouting operations with clearances
of 10mm to 100mm including:
Non-critical column and equipment bases.
An in-fill grout for cavity block walls.
In caulking of joints and pipes.
Between and under pre-cast panels and other joints
where total load bearing is not required
Underpinning where a grout similar in appearance to
concrete is required.
CHARACTERISTICS AND BENEFITS
Ready to use - premixed grout requires only the
addition of mixing water on site.
Low water/cement ratio - reduces drying shrinkage
and increases durability.
Damp packable - can be applied without slumping.