EPOGREEN EPG-233-2K WB

Specification of

Epoxy Paint

EPOGREEN EPG-233-2K WB is the latest generation Epoxy Paint. By combining Epoxy resin, acrylic and water based base materials, this product is very different from the previous Cat Epoxy. The most important difference from this product is that it can be applied both inside and outside the room and forms a film layer that is more flexible than the existing epoxy solvent based. For Epogreen 2K, besides being used for floor applications, it can also be used for applications on thin thickness walls. EPG-233-2K PROGREEN WB can be used for concrete floors and industrial building and commercial building walls.

Advantages:

• Water based system, odorless and friendly to the environment

• Can be applied inside and outside the room

• Has very strong adhesion to concrete

• Bright colors, not yellowing and resistant to UV light

• Has resistance to scratches, mild chemicals and household chemicals

• End display doff

• Has a film layer that is more flexible compared to solvent based epoxy

• Does not absorb dust, so it is easy to clean

• Has a short dry speed of about 2 - 6 hours

• Can be applied to substrate moisture up to 8% (elco meter)

• Easy to apply

Packaging:

10 kg-set (Epogreen 2 components)

40 kg-set (Epogreen 2 components)

45 kg-set (Epogreen 3 components)

Application Procedure:

Use EPG-233-2K WB products for the 1st and 3rd layers by mixing component A and component B with a weight ratio of 1: 1. Stir using a mixer.

Use the EPG-233-3K WB product for the 2nd layer by mixing component A, component B and component C with a weight ratio of 1: 1: 2.5. Stir using a mixer.

For the 1st and 3rd layer:

Pour the product that has been mixed into the floor and pull it using a rubber squeegee, then smooth it using a rubber roller. Material consumption is 0.3 kg-set / m2 / layer with a dry thickness of 150 miicron for each 1st and 3rd layer

For the second layer:

Pour the mixed product onto the floor and pull it using a steel trowel, then smooth it using a spike roller. Material consumption is 3 kg-set / m2 for 2000 microns (2mm) DFT thickness

Epogreen Finishing Tips:

• Make sure the surface of the substrate is dry and clean of all types of contaminants

• Before applying, the surface of the substrate must be grinding first

• Use roll and good quality application tools