Depo Kimia Konstruksi

sql
Deltaproof CB Flex
Hover to Zoom

Last Updated
17 Apr 2020
Country Origin
Indonesia
Minimum Order
1 Set

Specification of

Flexible Cementitious Based Waterproofing Coating

DESCRIPTION

Two-component acrylic polymer modified cementitious coating, which consists of specially selected cements, well-graded fine aggregates and additives supplied in powder form together with a liquid component of acrylic polymer, pre-dosed, ready for use as waterproofing slurry.

 

USES

For external and internal waterproofing coating, crack sealing on concrete, mortar, brickwork, in basements, swimming pools, water tanks, flat roofs, balconies, terraces, retaining walls, sea walls, tunnels, etc.

 

ADVANTAGES

  • Can be applied to wet or damp substrate
  • Good adhesion to substrate
  • Flexible, elastomeric properties will be able to bridge cracks
  • Fast curing, will allow for foot traffic when cured

 

COVERAGE

Depending on type of application, 2 coats are always required.

Waterproofing for toilet or bathroom : 1.25 kg/m2 at 0.7 mm of thickness.

Waterproofing for swimming pool or reservoir : 2.5 kg/m2 at 1.4 mm of thickness.

INTRUCTIONS FOR USE

The concrete surface should be sound, clean, free of oil, grease, dust or laitance and saturated surface dry. Then pour half of component A (liquid) into mixing vessel, then add all of component B (powder) and mix until you have slurry of uniform consistency.

Add rest of component A and mix again until you have uniform, lump-free mixture.

For mixing, a mechanical slow speed mixer is recommended with mixing time of 2-3 minutes, if Deltaproof CB is to be applied by trowel, use only 90% of liquid component.

INSTRUCTION FOR USE

The concrete surface should be sound, clean, free of oil, grease, dust or laitance and saturated surface dry. Then pour half of component A (liquid) into mixing vessel, then add all of component B (powder) and mix until you have slurry of uniform consistency. Add rest of component A and mix again until you have uniform, lump-free mixture. For mixing, a mechanical slow speed mixer is recommended with mixing time of 2-3 minutes.

 

Application

Always apply a minimum of two coats, the first coat on the still damp, pre-wetted substrate. The second coat is to be applied after the first coat has started to set and can support the following coat, usually after 2-6 hours, depending on climate.

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1

Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot