Depo Kimia Konstruksi

sql
DELTAFLOOR TC301
Hover to Zoom

Last Updated
16 Apr 2020
Country Origin
Indonesia
Minimum Order
1 set

Specification of

High Performance Epoxy Resin Floor Coating

DESCRIPTION

A two-component epoxy resin floor coating that suitable for top coat of epoxy resin flooring system. Deltafloor TC301 forms a gloss, impervious finish which is hard and smooth layer with excellent adhesion to concrete substrate. A wide range of colour is also provided to ensure the customer need.


USES

Deltafloor TC301 is recommended to areas where chemical resistance and aesthetic aspects are required. Deltafloor TC301 is recommended for use in floor of warehouses, industrial and food processing areas, kitchen, laboratory, engineering workshops, and car parks.


ADVANTAGES

Impervious seamless and jointless surface

Easy to clean and maintain

Hygienic

Chemical resistance and have aesthetic state of art

CONSUMPTION

Deltafloor TC301 consumption is 450 gram/m2 for 300 mikron thickness and 750 gram/m2 for 500 mikron thickness. Please kindly contact DELTACRETE to have appropriate technical assistance for the recommended thickness since material performance may vary at different surface.

INSTRUCTION FOR USE

For best performance of Deltafloor TC301, please kindly follow our recommendation. Preparation is a must before application. For new concrete, allow the concrete to cure at least 28 days. Humidity is not more than 75% measured in accordance with BS 8203. Since Deltafloor TC301 is relatively thin coating, the substrate must be fine textured. Any surface irregularities may show through causing excessive wear on high spots. Concrete substrate must be structurally sound, clean, dry and free from all traces of loose material, laitance, oil and grease. Any unsound material must be removed before application. Preparation by captive blasting or diamond grinding is ideal for surface preparation. Priming using Deltaprime Series will enhance the ahesion of top coat with the concrete. Deltafloor Color Pot should be mixed thoroughly with component A (enamel) first before further action. The two component of Deltafloor TC301 (component A and B) should be stirred individually before mixed together. Put both component in a mixing vessel and mix them thoroughly using low speed drill and mixing paddle mixer. Continue mixing process until a consistence homogeneous mixture achieved, normally it needed 3-5 minutes. Apply the mixed Deltafloor TC301 onto prepared surface using a brush or roller. Ensure that the area is completely coated and that 'ponding' material does not occur. Apply the second coat as soon as the first coat is initially dried ( typically 5 - 6 hours ).

CLEANING

Tools and equipment should be cleaned immediately after use, while the mixture are still un-cured with solvent cleaner. When mixture already harden, please kindly remove the material mechanically.

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1

Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot